LELIT Anna PL41TEM/110

The small-kitchen trade-off

A 57 mm group is a reason to check accessory compatibility before buying a generic espresso kit. For layout planning, use the sheet’s full 38 cm listed depth.

What the dimensions include

Technical sheet lists L × D × H = 23 × 38 × 34 cm. Older Anna manuals and listings can show a shorter depth; this preset retains the larger published envelope. Confirm handle inclusion for your unit.

We preserve the source’s dimensional basis and convert units for comparison. A rectangular footprint is a calculation from width and depth; it is not a measurement of the feet or proof that an appliance can sit at the edge of a shelf.

Access matters as much as size

Leave room for the multidirectional wand and the water tank. Check cup and scale height under the spouts separately from cabinet clearance.

Mark the published rectangle with masking tape, then rehearse your routine with the cup, tools and water container you intend to use. If the footprint touches another appliance, reserve a separate working area before deciding it fits.

Try an allowance before buying

For an initial single-item sketch, adding an illustrative 6 in preparation zone gives 15.06 in width. Adding 4 in total depth allowance gives 18.96 in depth, and adding 3 in overhead gives 16.39 in height. These are adjustable planning choices, not required safety clearances. A second appliance can change the deepest and tallest item.

Open this model in the full planner to include another appliance and change the allowances. For a grinder-only filter station, replace the illustrative machine with your brewer’s dimensions.

What still needs checking

Match the exact model and regional electrical version, confirm the current price and availability, and read its placement instructions. We have not independently measured noise, speed, cup quality, durability or the moving-part envelope. These specifications cannot settle those questions.

Read the original specification source ↗ · Our research method